Model 802 Automatic Edge Banding Machine | Specifications

Voltage-Verified Configuration — every 802 automatic edge banding machine is cross-checked against your facility's electrical supply before production begins, preventing the three-week transformer delay I once saw strand a semi-auto bander at a Middle East cabinet shop.

Technical Specifications

Application Suitability

Why the Voltage Question Must Precede the Purchase Order

Confirming rated voltage and frequency before production avoids a machine that sits dead on the workshop floor.

I watched a Middle East customer wait three weeks for a step-down transformer because the voltage on a semi-automatic bander was never reconciled with the local grid. The 802 is rated at 220V, but frequency — 50 Hz or 60 Hz — changes motor behavior and heating element performance in ways that are invisible until the first panel runs through. Technical buyers comparing automatic edge banding machine specifications often skip this line item because it feels elementary, yet mismatched supply remains a leading cause of commissioning failure in cross-border equipment purchases [NEED_CITE: voltage and frequency standards by export market]. A formal voltage confirmation document, reviewed before the build starts, removes the variable entirely.

Mapping Feed Speed to Daily Panel Volume

At 0–10 m/min, the 802 covers the throughput expectations of a small to mid-scale cabinet operation running a single shift. The variable feed lets operators slow down for thick 50 mm stock where glue penetration and trimming quality demand patience, then dial up for standard 18 mm MDF panels. The key is matching this figure to your upstream saw output so panels never queue longer than the glue pot's open time allows.

How Glue Pot Capacity Shapes Shift Planning

A 4000 ml glue pot paired with a 1000 W heating element means the 802 reaches working temperature in five to ten minutes and holds enough adhesive for sustained runs before refill becomes necessary. For a technical buyer, this capacity reduces mid-shift interruptions that disrupt edge registration consistency. The digital temperature display on the control panel gives operators direct feedback, so adjustments happen without guesswork.

Reading the Trimming and Polishing Power Figures

The double 800 W high-speed trimming motors and dual 180 W polishing motors define the finish quality you can expect on MDF and particleboard edges. Higher trimming wattage sustains cutter speed under load, which matters when the trimming station meets a dense particleboard core. Polishing motors at 180 W each are adequate for removing residual adhesive haze on PVC and melamine strips without burning softer veneer materials. These automatic edge banding machine specifications directly predict whether a second pass will be needed downstream.

The Pressure Beam and Belt Mechanics That Protect Panel Surfaces

An integrated one-piece pressure beam with double rows of pressure wheels distributes clamping force evenly across the panel width. This design prevents the localized bowing that causes edge strip lift on wider boards. The silicone conveyor belt resists scratching on pre-finished panels, and the pneumatic belt-breaking mechanism snaps the strip cleanly at the panel tail without leaving overhang that would require hand trimming [NEED_CITE: CE machinery directive requirements for woodworking equipment]. The 1200 W integrated suction unit captures trim waste at source, keeping the conveyor clear for the next board.

When a Spec Sheet Misses Your Substrate Reality

Buying on paper specifications alone is how workshops end up with visible glue lines on particleboard that the brochure photos never showed. The 802's trimming motors, pressure wheel rows, and glue temperature range are calibrated for specific strip and substrate pairings, and those interactions are not fully captured in a parameter table. Without requesting a factory test record run on your exact MDF grade and PVC strip thickness, you are gambling that the automatic edge banding machine specifications translate from the test bench to your production floor. That gap between spec sheet and shop reality is where assembly tolerances quietly fail [NEED_CITE: edge banding adhesion standards for panel furniture].

Sourcing Decisions Anchored in Verifiable Build Quality

The 802 benefits from an in-house manufacturing process where component grinding, assembly, and final testing happen under one roof rather than across subcontracted workshops. A four-stage quality control sequence — incoming material, in-process, finished product, and pre-shipment verification — catches tolerance drift before the machine is crated. Voltage, control panel language, and plug configuration are confirmed per order, not left to assumption. Patented cutting mechanisms hold trimming accuracy to verifiable levels, documented in the factory test record rather than asserted in marketing copy. Engineer-led configuration review means the 802 is recommended only when its feed speed and panel thickness range align with your actual production mix.

Documentation & Verification

• Machine specification sheet detailing all 802 parameters against your confirmed requirements
• Electrical schematic and voltage confirmation document matched to your facility supply
• Factory test record on your specific panel thickness and strip material before dispatch
• Operation and maintenance manual in your operator's preferred language
• Spare parts list with trimming cutter and polishing wheel part numbers
• CE declaration of conformity and ISO 9001 certificate available on request

Installation, Commissioning & Support

• KD-packed 802 requires a flat concrete floor section of at least 150 × 80 cm for assembly clearance
• Dedicated 220V circuit rated for the 4 kW total draw with appropriate breaker sizing
• Pneumatic supply at 0.4–0.6 MPa must be plumbed before commissioning begins
• Glue pot heat-up verified during first-run calibration across the 10–50 mm panel range
• Digital control panel set to agreed language and temperature parameters during operator training
• Trimming cutters and polishing wheels stocked as first-order spare parts for continuous uptime

Preparing a Specification-Matched Inquiry

To move from brochure review to a firm 802 quotation, share your panel materials with thickness distribution, the edge strip types you run most often, and your facility's confirmed voltage and frequency. Include your daily panel volume so the feed speed can be evaluated against your shift schedule. If your workshop shares compressed air across multiple stations, note existing demand so the 0.4–0.6 MPa requirement can be assessed against available capacity.

Frequently Asked Questions

Q: Can the 802 be configured for 110V or 380V electrical systems? A: The standard rating is 220V. Voltage adjustment for 110V or 380V markets requires motor and heating element changes that affect power output and heat-up time. A formal voltage confirmation document is issued before production to ensure the rewound configuration matches your grid, including frequency alignment for 50 Hz or 60 Hz regions.

Q: What daily panel output is realistic at the 0–10 m/min feed speed? A: Actual throughput depends on panel length, operator load rhythm, and whether trimming quality settings require slower feed for thick stock. At mid-range speed on standard 18 mm cabinet panels, a single-shift operation can sustain continuous processing. The 4000 ml glue pot reduces refill interruptions that would otherwise fragment productive runtime.

Q: Does the 10–50 mm panel range cover standard cabinet boards and thicker tabletops? A: The 10–50 mm range accommodates 18 mm MDF and particleboard used in cabinet carcasses as well as thicker solid wood panels for tabletops. Operators adjust the pressure beam height and feed speed for each thickness. Running panels near the upper limit may require reduced feed speed to maintain trimming quality.

Q: How does the 802 differ from entry-level models with smaller glue pots? A: The 4000 ml glue pot on the 802 is substantially larger than the 1000 ml capacity found on compact entry-level banders, allowing longer continuous runs before refill. The double trimming motors and integrated dust collection also position the 802 for sustained production rather than occasional use in a mixed-duty workshop.