Specifications Manual Edge Banding Machine for Furniture Repairing

Verified Tolerance Claims — Every ST-50 manual edge banding machine is dispatched with a factory test record on your specified panel substrate and edge thickness, so the tolerance you see is the tolerance you get on the shop floor.

Technical Specifications

Application Suitability

Why the Voltage Question Must Come Before the Quotation

Confirming your local voltage and plug standard before production starts eliminates the most common cause of workshop commissioning delays.

I have seen manual edge banding machines arrive at job shops only to sit idle because the frequency mismatch tripped the motor relay within the first hour of operation. Buyers often focus on manual edge banding machine specifications like feed speed and thickness range, then treat electrical compatibility as an afterthought. In reality, a unit configured for the wrong supply cannot even reach the glue pot's operating temperature, which means the banding will not adhere regardless of how well the mechanics are built. [NEED_CITE: voltage and frequency standards by export market]

Dual-Mode Banding for Mixed-Shape Production Runs

The ST-50 handles both curved and straight edges within the same session, removing the need for a dedicated contour unit when volumes are low. A 0.3–3 mm thickness range covers standard PVC, melamine, and thin veneer banding, which is where most furniture repair and small cabinet shops operate. This dual capability matters when manual edge banding machine specifications are being compared across a short list and the buyer needs one machine rather than two.

Compact Footprint Without Sacrificing the Glue Reservoir

At 50 × 50 × 47 cm and 22 kg, the ST-50 fits on a standard workbench and can be repositioned as the shop layout changes. The 1000 ml glue pot capacity supports continuous small-batch runs without frequent refills, which keeps the operator focused on edge quality rather than watching a level gauge. The air supply requirement of 0.5–0.8 MPa aligns with typical workshop compressors, so no dedicated air line is necessary for installation. [NEED_CITE: typical workshop compressed air pressure standards]

Reading the Specification Sheet Against Your Actual Panel Stock

Edge banding height of 0–50 mm and minimum sheet dimensions of 25 cm length by 3 cm width define the practical envelope of this unit. If your repair work involves narrow drawer sides or small shelf brackets, these minimums tell you whether the panel can be fed and held against the banding wheel without jig support. The 1000 W total power drives both the glue heater and the edge motor, so on a 220 V single-phase supply the unit draws roughly 4.5 A — well within a standard workshop circuit. Selecting the right manual edge banding machine specifications means matching these numbers to your thickest board and widest banding tape before placing an order.

The Hidden Cost of Ignoring Edge Thickness Range

When a machine is asked to apply 3 mm solid-wood banding but was set up and tested at the factory with 0.5 mm PVC, the glue temperature and feed pressure will be wrong from the first piece. The result is edge lift on the second or third cycle, which the operator blames on the adhesive rather than the configuration gap. This mismatch accounts for a significant share of early-life warranty calls on manual edge banding machines, and it is entirely avoidable if the buyer states their actual banding material during the quotation stage. [NEED_CITE: common causes of edge banding adhesion failure in small workshops]

Why Buyers Source This Model Through Our Configuration Process

Every ST-50 leaves the facility with an electrical schematic and voltage confirmation document that matches the buyer's declared supply, so there is no ambiguity at the terminal block. The operation manual is delivered in the language agreed at order — English, Spanish, French, or Chinese — meaning the operator does not have to translate control labels on day one. A factory test record documents actual banding performance on the substrate the buyer nominated, providing a baseline the workshop can replicate. Spare parts for the glue pot and edge-feed consumables ship with the unit, reducing the window between uncrating and first production piece.

Documentation & Verification

• Electrical schematic confirming your declared voltage and plug type before shipment
• Factory test record on your specified panel substrate and edge banding thickness
• Operation and maintenance manual in the agreed operator language
• Spare parts list covering glue pot seals and banding feed consumables
• CE declaration of conformity for import clearance in regulated markets

Installation, Commissioning & Support

• Place on a level workbench; 50 × 50 × 47 cm footprint requires no floor anchoring
• Connect to a dedicated 220 V or 380 V circuit matching the confirmed electrical schematic
• Supply compressed air at 0.5–0.8 MPa through a standard quick-connect fitting
• Set glue pot temperature and banding feed rate on the control panel during first-hour trial
• Review the included spare parts list and order consumable seals before initial production volume increases

What to Share With Us Before Quotation

Send us the panel substrates you run most often, the edge banding material and thickness range, and your workshop's voltage and frequency. If you work with curved components, include a photo or sketch of the tightest radius so we can confirm whether the manual edge banding machine specifications of the ST-50 cover your geometry. We will respond with a configuration proposal and formal quotation within one working day.

Frequently Asked Questions

Q: How do I confirm the correct voltage and plug type for my local power supply? A: Provide your local voltage, frequency, and plug standard when you submit an inquiry. We configure the ST-50 to your exact supply before production and include an electrical schematic with the shipment. Available plug options cover EU, USA, AU, and UK standards, and custom configurations are available for other markets.

Q: What panel and edge banding thickness range does the ST-50 support? A: The unit handles edge banding thickness from 0.3 to 3 mm and a banding height of 0 to 50 mm. Minimum sheet dimensions are 25 cm in length and 3 cm in width. This range covers most MDF, particleboard, plywood, and solid wood panels used in furniture repair and small cabinet production.

Q: Can the control panel be supplied in a single language for my operators? A: Yes. The ST-50 control interface is available in Chinese, English, Spanish, or French, and other languages can be configured on request. The chosen language is confirmed at order so that the operator manual and all on-screen labels match before the machine leaves the factory.

Q: What air supply pressure and connection are required on-site? A: The ST-50 requires compressed air at 0.5 to 0.8 MPa delivered through a standard workshop quick-connect fitting. Most existing workshop compressors meet this requirement without modification. Ensure the air line includes a moisture trap to prevent condensation from reaching the pneumatic components.

Q: How is the glue pot maintained and what spare parts should I stock? A: The 1000 ml glue pot should be drained and cleaned at intervals stated in the operation manual to prevent adhesive carbonization. A spare parts list ships with the machine and includes glue pot seals and banding feed consumables. We recommend ordering an additional seal kit with your initial purchase to minimize downtime during routine maintenance.