Single Head Hinge Boring Machine JL-1 | Specifications10100

Verified Tolerance & Configuration — The JL-1 ships with confirmed voltage, plug type, and control language locked in before production, ensuring the machine matches the buyer's facility from day one.

Technical Specifications

Application Suitability

Why the Voltage Question Should Come Before Single Head Hinge Boring Machine Specifications

Confirm electrical supply before comparing drill sizes or feed rates.

I have seen hinge boring machines sit idle on workshop floors for weeks because the quoted voltage did not match the available three-phase supply. A 380V machine delivered to a facility running 220V single-phase becomes a heavy paperweight until an electrician rewires the entire circuit or the buyer sources a step-up transformer [NEED_CITE: voltage and frequency standards by export market]. The cost of that delay extends beyond the machine itself — production schedules slip, operators sit idle, and the capital tied up in the equipment generates no return.

The JL-1 is available in 380V/415V three-phase configurations, but the frequency must also match. A machine wound for 50Hz running on a 60Hz supply will spin the motor faster than designed, affecting drill feed consistency and potentially shortening motor life. This is why the electrical schematic and voltage confirmation document are prepared before shipment rather than after the machine arrives.

Drill Head Configuration and Hole Coverage

The JL-1 carries a 35 mm large drill for standard hinge cup holes and a 3 mm small drill for dowel or pilot holes, covering the two most common drilling operations in cabinet door assembly. The dual-head arrangement eliminates the need to change drill bits between operations, keeping the operator focused on panel positioning rather than tool swaps. Single Head Hinge Boring Machine specifications at this level should always list both diameters, as some hinge systems require non-standard cup sizes that fall outside this range.

Guide Rail Precision and Drilling Repeatability

The precision guide rails on the JL-1 govern how consistently the drill head returns to the programmed position across a production run. When drilling dozens of identical cabinet doors, even minor lateral play in the sliding mechanism translates to hinge holes that drift from their intended center point [NEED_CITE: woodworking assembly tolerance requirements for panel furniture]. Drift forces the assembler to ream or shim during hinge mounting, adding time to every door that leaves the bench.

Motor Type, Power Draw, and Noise

The pure copper motor at 1.5 kW provides adequate torque for boring into MDF and particleboard without stalling under continuous duty. Copper-wound motors run cooler than aluminum-wound equivalents, which matters when the machine is cycling through hundreds of hinge holes in a shift. The external vacuum connection ports dust extraction to the shop's central collection system rather than relying on a small onboard bag that fills quickly and reduces suction.

Reading the Specs That Affect Your Assembly Line

The 70×56×145 cm footprint and 55 kg net weight mean the JL-1 can be positioned on a standard workbench without dedicated floor anchoring, provided the bench can absorb vibration from the motor start-up cycle. The vertical and horizontal drilling position adjustment allows hinge placement to match different cabinet designs without moving the machine itself. The foot switch control frees both hands for panel alignment, which is the practical difference between a clean 35 mm cup hole and one that tears at the melamine edge when the operator is also trying to hold the workpiece steady.

What Happens When Configuration Is Skipped

A hinge boring machine quoted without confirmed voltage arrives at the dock and waits. A machine with a control panel in a language the operator cannot read delays commissioning until a translated overlay is fabricated or the interface board is swapped [NEED_CITE: CE machinery directive requirements for industrial equipment]. These are not manufacturing defects — they are ordering gaps that compound into production delays and erode the buyer's confidence in the equipment before the first hole is drilled.

Why Procurement Through This Channel Reduces Specification Risk

Voltage, plug type, and control panel language are confirmed at the quotation stage rather than discovered at installation. The electrical schematic is provided before the machine ships, giving the buyer's electrician time to prepare the circuit. A factory test record on the buyer's specified panel material is available for pre-shipment review. The machine specification sheet details drill sizes, guide rail type, and motor winding material so the technical buyer can verify the configuration matches the production requirement. Engineer-led configuration recommendation means the JL-1 is proposed based on the buyer's actual panel thickness and hinge type rather than selected from a stock list.

Documentation & Verification

• CE declaration of conformity specific to the JL-1 hinge boring unit
• ISO 9001 certificate covering the manufacturing facility
• Machine specification sheet listing drill diameters, motor type, and voltage
• Electrical schematic with confirmed voltage and plug type before shipment
• Factory test record on buyer's panel material and hinge cup depth
• Operation and maintenance manual in the agreed language with spare parts list

Installation, Commissioning & Support

• The 1.5 kW motor requires a dedicated three-phase circuit matching the confirmed 380V/415V supply
• At 70×56×145 cm, the JL-1 fits a standard workbench without floor anchoring but requires a stable, level surface
• External vacuum port connects to the shop dust collection system using standard ducting diameter
• Foot switch control is tested during commissioning to confirm responsive start-stop cycling
• Vertical and horizontal position adjustment is calibrated on-site using the buyer's actual panel stock
• Spare drill bits for the 35 mm and 3 mm heads are listed in the included parts documentation

What to Prepare Before Requesting a Quotation

Provide the panel material and thickness you will drill most frequently, the hinge cup diameter and depth required by your hardware supplier, and the three-phase voltage and frequency available at the installation point. Confirm the plug standard for your region and the control panel language your operators read. If you are integrating the JL-1 into an existing door production cell, note the upstream saw or router that feeds panels to this station.

Frequently Asked Questions

Q: How do I confirm the correct voltage and plug type for my workshop? A: The JL-1 is available in 380V/415V three-phase configurations for 50Hz or 60Hz supplies. Before the order is placed, provide your facility's actual supply voltage, frequency, and the plug standard used in your country. An electrical schematic reflecting your confirmed configuration is issued before shipment so your electrician can prepare the circuit in advance.

Q: Do the 35 mm and 3 mm drill sizes cover all standard cabinet hinges? A: The 35 mm drill covers the standard European hinge cup bore used by most concealed hinge manufacturers, and the 3 mm drill handles dowel or pilot holes. If your hardware requires a non-standard cup diameter, confirm this before ordering so the appropriate drill size can be substituted or the machine configured accordingly.

Q: Can the control panel be supplied in a language my operators can read? A: Control panel language options include Chinese, English, Spanish, and other languages upon request. The selected language is confirmed at the quotation stage so the interface matches the operator's requirement when the machine is commissioned, avoiding delays caused by unreadable menus or labels.

Q: Is the foot switch control safe for continuous production use? A: The foot switch allows hands-free drill activation while the operator positions the panel, keeping both hands clear of the drill head. For high-volume production, confirm with your facility's safety officer that foot-operated controls meet your local machinery safety standards, as some jurisdictions require additional guarding or light curtains on drilling equipment.

Q: What dust extraction setup does the JL-1 require? A: The machine uses an external vacuum connection, meaning it routes to your workshop's central dust collection system rather than an onboard bag. Confirm the duct diameter and suction capacity of your existing system to ensure adequate extraction at the drilling point, particularly when boring MDF which generates fine particulate.